Asrock H77M Instant Boot Driver
In UEFI menu(canc at the beginning) Secure Boot and Fast Boot are disabled. I found on the internet that the partition table is MBR if UEFI is. My Asus boots so fast it came with a utility to reboot directly to BIOS. Well with a dual-boot Linux setup I have most of the fast boot stuff disabled. ASRock Instant Boot ensures clean OS. S3/S4 will slow down system, causing no response to the applications or system hang due to accumulated garbage data.
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* [*Free Registration Required]|
Asrock H77M Instant Boot Driver
Unable to access bios after enabling Ultra Fast Boot
Android Studio, an application that on a traditional HDD is a bit of a sluggish loader loads to the blinking cursor in about 10 seconds, which is probably more a reflection on the i3 than the SSD. All desktop operations are Asrock H77M Instant Boot smooth, flicking Flash heavy sites top to bottom and back is instantaneous without visual tearing or any issues. Since I don't game on this system I'm not planning on installing a discrete video Asrock H77M Instant Boot and am extremely happy with 2D video performance, but cannot assess the performance of the PCI slot.
I did try to drive a third monitor via the VGA connector but wasn't successful. While Linux immediately detected it, popped up the display configuration app and even detected all the supported resolutions correctly, I could never actually get a picture on the monitor.
BIOS startup not happening Solved - Windows 10 Forums
You are free to choose whichever you like, but you must make sure that it contains the package 'efibootmgr', and also that it contains an Asrock H77M Instant Boot kernel module. This module if often called 'efivars'. The tested distribution at this time is Mint Linux.
This is a modern, up-to-date distribution, and contains the package and module described above. It does not require a network connection, which some other distros may need. Follow this link to download the version I used successfully. The instructions in this guide assume you are using this distribution, other distributions may be slightly different.
You will need to create a bootable drive with the linux you downloaded. Since the download is a standard. Make sure you do not overwrite your OSX Unibeast installer.
Part 2: Press F11 or whichever key your system uses to get to the boot selection list. In the list you will see several entries, and the one you are looking for is UEFI and represents the drive containing your linux. Here is what mine looked like: In this case, I wrote the linux iso image to Asrock H77M Instant Boot and booted from that. Only boot from the UEFI entry.
Asrock H77M-ITX Instant Boot Utility 1.29 49.3 MB sendspace download
Using non-UEFI means it will not work as expected. It may seem odd that you have a UEFI entry for your removable drive with linux on it, but not for your system drive with the OSX installation.
This is the quirk we are attempting to fix with this method. Wait for the linux desktop to load. This may take a few minutes depending which medium you are booting from. As the desktop loads, you will see a login box on the screen. Don't enter anything here, the system Asrock H77M Instant Boot automatically log you in after a few seconds. Part Asrock H77M Instant Boot Change The Settings Here is where we really get stuck in; once again, pay close attention.
At the bottom left of the linux desktop screen, next to the menu button you will see several small icons.
مادربرد ازراک H77M لیون کامپیوتر
Click on the icon for 'Terminal'. This will open a window similar to the 'Terminal' application in OSX.
Now type in the following commands and press Return: The system has already given us elevated privileges, but doing this will save extra typing. This is needed so that linux can communicate with the UEFI system on your motherboard. It is already on the linux system but not installed by default.
You will see some text on screen as the package is installed. Use with a processor belonging to an unsupported series is not recommended.
ASRock "4 second" Instant Boot for Windows
Despite accomplishing such a complex purpose, the software adopts a rather simple interface and requires very little effort from the user. When launched, it displays a set of three main options, which allow you to choose between fast or regular mode, or to disable it altogether.
The regular mode uses the S4 ACPI and is able to boot your system in about 20 seconds from a shutdown statewhile with the fast mode, you will be able to see your desktop in about four seconds.